贵州快3

  • 电话:0531-88629266
  • 传真:0531-88629266
  • 邮编:250000
  • 联系人:葛经理
  • 手机:13589069266
  • 地址:济南市天桥区桑梓店镇52中学对面
贵州快3当前位置:贵州快3-贵州快3
    济南彩钢板出现爆漆现象的原因是什么?
    来源:http://www.wasolo.com  2019-07-09 11:38:22

      彩涂板目前已经在我们的生活中得到了广泛的应用,这种产品的操作,但是在使用过程中,有时会出现油漆爆炸的现象,产生这种现象的原因是什么?

      Color coated sheet has been widely used in our life. The operation of this product, but in the process of use, sometimes there will be paint explosion. What is the reason for this phenomenon?

      1. 所述彩色涂料单元的表面涂有no。2 .水淬盖板槽。检查时发现有泥沙、粉尘,出口检查镜有粉尘,部分滚轮表面也有浮尘。灰尘会影响成品的表面质量,特别是可能产生彩板老化涂层质量缺陷。

      1. The surface of the color coating unit is coated with No. 2. Water quenched cover plate groove. During the inspection, sediment and dust were found, dust was found in the exit inspection mirror, and dust was also found on the surface of some rollers. Dust will affect the surface quality of finished products, especially the quality defects of ageing coating of color plate.

      2。 每2小时检查一次钝化板的温度生产工艺。钝化板的温度没有实时跟踪。当冬季环境温度为10℃时,2小时内由于环境温度的变化可能会导致钝化后的印版温度发生变化,导致彩版老化,在压力下划伤漆面缺陷。

      2. Check the temperature production process of passivation plate every 2 hours. The temperature of passivation plate is not tracked in real time. When the ambient temperature is 10 C in winter, the change of ambient temperature in 2 hours may lead to the change of plate temperature after passivation, leading to the ageing of the color plate and scratching the lacquer surface defects under pressure.

      3.应先加钝化液,再配水箱时加水。当钝化液的密度高于水的密度时,会导致混合不均匀,钝化层与基体之间附着力差,容易造成表面油漆质量缺陷。

    20121114135458975897.jpg

      3. Passivation liquid should be added first, then water should be added when water tank is allocated. When the density of passivation solution is higher than that of water, it will lead to uneven mixing, poor adhesion between passivation layer and matrix, and easy to cause surface paint quality defects.

      所谓彩钢板,就是利用剪切连接钢板与混凝土在一起,共同受力,充分发挥这两种材料的固有优势,具有重量轻、强度高、刚度大、施工方便快捷、易于更新、便于工业化生产等优点。

      The so-called color steel plate is to make full use of the inherent advantages of these two materials by shearing the steel plate and concrete together and exerting force together. It has the advantages of light weight, high strength, high stiffness, convenient and fast construction, easy renewal and easy industrial production.

      从外观上看,金属材料别人欣赏,彩钢面板光泽,颜色完全覆盖,或亮度,光滑,比塑料,金属材料大的优势是质感强,普通情况下,塑料面板机械在生产过程和缺陷,很难恢复,影响美观,彩钢面板可以巧妙地隐藏在机械行和模具的生产缺陷,达到完美的效果,手感更细腻。塑料强度远低于彩色钢板、塑料面板损坏现象,塑料我力承载能力差,导致很容易打破和变形、应力、碰撞和跌落,容易打破,和颜色的钢板可以很好的防止类似的现象,甚至弯曲变形,可以使用拉直,不需要担心运输过程的损坏现象,大大减少维修的概率,压缩成本,增加利润。

      From the appearance, the metal material is appreciated by others, the color steel panel is glossy, the color is completely covered, or brightness, smoothness, than plastic, metal material, the biggest advantage is strong texture, under normal circumstances, plastic panel machinery in the production process and defects, it is difficult to restore, affecting beauty, color steel panel can cleverly hide in the production of machinery lines and molds. Set, to achieve the perfect effect, feel more delicate. The strength of plastic is much lower than that of color steel plate and plastic panel. The poor load-carrying capacity of plastic leads to easy breaking and deformation, stress, collision and fall. It is easy to break. The steel plate with color can prevent similar phenomena, even bending and deformation. It can be used to straighten out without worrying about the damage during transportation. Reduce the probability of maintenance, reduce costs and increase profits.


快乐时时彩 贵州快3 贵州快3 贵州快3开奖结果 快乐时时彩 贵州快3 贵州快3 贵州快3 贵州快3 贵州快3