贵州快3

您好,欢迎访问济南汇鑫彩钢 !为您提供济南彩钢板房,济南c型钢

全国服务热线

15253185838

15865282363

  • 3
  • 2
  • 1
    当前位置:贵州快3>贵州快3>彩钢夹芯板在运输过程中要注意什么?

    彩钢夹芯板在运输过程中要注意什么?

    来源:http://www.wasolo.com/ 日期:2019-12-09 发布人:admin
      许多的建筑物都需要使用到它,彩钢板可以分为好几种类型,彩钢夹心板也是其中一种,那么您知道彩钢夹心板在运输过程需注意什么事项吗?下面小编来和您讲述一下。
      Many buildings need to use it, color steel plate can be divided into several types, color steel sandwich plate is also one of them, so do you know what should be paid attention to in the transportation process of color steel sandwich plate? Let me tell you something about it.
      一、彩钢夹心板当运输板材时,应留意运输板材的高度能否超出了拖车的长度,并且要停止相应的避免倾覆工作。
      I. when transporting the color steel sandwich plate, pay attention to whether the height of the transporting plate exceeds the length of the trailer, and stop the corresponding work to avoid overturning.
      二、在运输过程中应将机房墙板稳定结实的绑扎在车上,并且应运用木楔等暂时固定的措施来防止因车身晃动所惹起的松动和挤压变形等现象的发作,从而降低金属外表磨损或划伤的几率。
      II. During the transportation, the wall board of the machine room shall be bound on the vehicle stably and firmly, and temporary fixing measures such as wooden wedges shall be used to prevent the occurrence of looseness and extrusion deformation caused by the shaking of the vehicle body, so as to reduce the probability of metal surface wear or scratch.
    济南彩钢板厂
      三、彩钢夹心板在装车时,应提早将机房墙板和配件按型号品种等条件分装好,并且要捆绑结实稳定以避免金属面被磨损或划伤。
      III. when loading the color steel sandwich panel, the wall panel and accessories of the machine room shall be separately packed according to the model and type, and shall be bound firmly and stably to prevent the metal surface from being worn or scratched.
      四、运输货物的车辆选用——应依据机房墙板的规格尺寸品种来选择适宜的运输车辆型号。普通选用大型的专用拖车运输。停止将机房墙板绑扎在车上的工作时,选用同等板长的角钢或者角铁放置在顶层机房墙板两边的转角处,这样可平均分配绳索捆扎的压力,起到防止压力集中而损坏压磨(压凹)机房墙板的边缘。
      IV. selection of vehicles for transportation of goods: the appropriate model of transportation vehicles shall be selected according to the specifications, sizes and varieties of wall panels in the machine room. Large special trailers are generally used for transportation. When the work of binding the wall board of the machine room to the vehicle is stopped, angle steel or angle iron of the same board length shall be placed at the corner of both sides of the wall board of the machine room on the top floor, so as to evenly distribute the binding pressure of the rope and prevent the edge of the wall board of the machine room from being damaged (concave) due to the pressure concentration.
      如若需要了解更多关于彩钢夹心板的资讯,欢迎点击进入咱们公司的官网。
      If you need more information about color steel sandwich panel, please click to enter our company's official website.

    贵州快3咨询热线:15865282363    15253185838

    地址:济南市历城区荷花路与机场路交叉口

    Copyright © 2019 济南汇鑫彩钢 All Reserved版权所有

    济南汇鑫彩钢二维码

    济南汇鑫彩钢二维码

    贵州快3 快乐时时彩 贵州快3走势图 快乐时时彩 快乐时时彩 贵州快3开奖结果 快乐时时彩 贵州快3 贵州快3 贵州快3